Is a vacuum connection for an NPT pipe fitting available for the vacuum tables?
Yes, just specify the size. Standard high flow size or pipe taps available.

I already own a vacuum pump. Will it work with your vacuum table?
It should work. If not, you can always get a pump from us later on. If you decide to use the pump you have now we have reducers to fit our standard vacuum hose connection. Just let us know the inner diameter of your vacuum hose. Or, use our standard hose and manifold and we will make an adapter to fit your vacuum pump.

Is there a way to orient my part on the vacuum table in the same place each time?
Yes. You can make your own stop out of a rigid substrate and fasten it to the vacuum table top. We also carry options such as an automatic pin registration system which is a set of three steel pins located inside the vacuum table that are in the up position for loading and automatically retract when the vacuum is actuated. Sets of more than 3 are available.

I am working with substrates which are prone to scratching. I do not want the substrate to scratch against the vacuum table when loading and unloading, is this possible?
Yes, you can use the vacuum valve with blowback. This valve blows air through the table for loading and unloading which creates a similar effect to an air hockey table. This option includes the ability to adjust the amount of air being blown back into the vacuum table when the vacuum is off. Compressed air (60 PSI) required

Product Lines

Screen Printing Equipment Catalog

Options And Fixtures

UV and IR Curing Equipment

Vacuum Tables

Loaders And Unloaders

Part Stacker Equipment

Rotary Base Indexer Machine

CD/DVD Screen Printing Equipment

Used Screen Printing Equipment

Parts Department

Application Guides

Screen Printing Equipment for Specific Products

Screen Printing Solutions

ETC

Corporate Info

About Us

News

Contact Us